Demolition Nominated Supervisor Training

Units of Competency

• CPCCWHS2001 : Apply WHS requirements, policies and procedures in the construction industry (Prerequisite)

  This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces.

  It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others.

  The unit covers fundamental WHS requirements necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity.

  It applies to workers in the construction industry.

  This unit also relates directly to the general construction induction training requirements of the Model Work Health and Safety Regulations 2011 and relevant occupational health and safety regulations for Victoria and for Western Australia. Achievement of CPCWHS1001 Prepare to work safely in the construction industry covers these induction training requirements.

  No licensing, legislative or certification requirements apply to this unit at the time of publication.

• CPCCDE3016 : Identify hazards on demolition sites and apply risk management strategies

  This unit of competency specifies the skills and knowledge required to identify hazards common to demolition work, and undiscovered hazards that may arise during the course of work on demolition sites. It includes assessing risks and applying risk management strategies according to compliance and workplace requirements.

  It supports the induction procedure for specialist demolition workers before beginning work on site.

  This unit does not replace requirements for completion of construction work health and safety (WHS) units.

  Completion of the general construction induction training program specified by the model code of practice for construction work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCBC4002 : Manage work health and safety in the building and construction workplace

  This unit of competency specifies the skills and knowledge required to inspect workplaces for hazards and conduct work health and safety (WHS) risk analyses. It includes the development and implementation of appropriate responses to mitigate risks to meet government legislation and regulations.

  This unit of competency applies to builders, site managers and forepersons who are responsible for the management of risk in building and construction workplaces.

  This unit of competency is suitable for those using specialised knowledge to complete routine and non-routine tasks and using their own judgement to deal with predictable and sometimes unpredictable problems.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, regulatory or registration requirements apply to this unit of competency in some jurisdictions. Relevant state and territory regulatory authorities should be consulted to confirm these requirements.

• CPCCDE3018 : Select and use small plant and equipment for demolition tasks

  This unit of competency specifies the skills and knowledge required to select and use small plant and equipment safely and effectively to complete individual demolition tasks, such as breaking concrete, stripping out interior of buildings, pulling down walls and separating waste for recycling.

  The unit applies to workers performing on-site specialist demolition work using powered small plant and equipment on public, residential, commercial and industrial buildings.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCDE3019 : Demolish small buildings and structures using hand tools and small plant and equipment

  This unit of competency specifies the skills and knowledge required to select and use hand tools, small plant and equipment safely and effectively to demolish small buildings and structures. Manual demolition processes include dismantling or demolishing and removing materials and component parts of a building or structure using only hand tools, small plant and equipment.

  The unit applies to workers performing on-site specialist demolition work using powered small plant and equipment on public, residential, commercial and industrial buildings.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCDE3020 : Select and use tools and equipment for hot work in the demolition industry

  This unit of competency specifies the skills and knowledge required to cut materials using cutting processes that create a heat source that could cause an ignition. The unit covers the safe operation and maintenance of tools and equipment for hazardous demolition hot work.

  It includes the safe on-site operation and maintenance of tools and equipment used for hazardous demolition hot work.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Hot work permits and licenses for the operation of specialised hot-work equipment are required in different states and territories.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCDE3022 : Manage demolition recyclable waste materials and contaminated soil using load shifting equipment

  This unit of competency specifies the skills and knowledge required to organise the removal of different types of demolition recyclable and waste materials and contaminated soil. It involves the operation of a range of load shifting equipment on demolition sites and incorporates knowledge of recyclable materials and the safe disposal of hazardous materials.

  The unit does not provide training and assessment for operation of individual items of plant.

  Candidates may only enrol in this unit after successfully completing separate operator training and assessment that confirms the capability of the person to safely operate the items of plant covered in this unit.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authority.

• CPCCBC4012 : Read and interpret plans and specifications

  This unit of competency specifies the skills and knowledge required to read and interpret plans and specifications applicable to residential and commercial projects. It includes identifying site characteristics, features of the proposed building and details of the construction.

  It applies to National Construction Code (NCC) classifications:

  Residential – Class 1 and 10 buildings, maximum two storeys
  Commercial – Class 2 to 9, Type C only constructions.
  The unit of competency applies to site managers, forepersons, estimators, builders, managers and other building and construction industry personnel who read and interpret plans and specifications for quantity surveying, costing and tendering and construction of building and construction projects.

  This unit is suitable for people with specialised knowledge, completing routine and non-routine tasks and using their own judgement to deal with predictable and sometimes unpredictable problems.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, regulatory or registration requirements apply to this unit of competency in some jurisdictions. Relevant state and territory regulatory authorities should be consulted to confirm these requirements.

• CPCCDE4001 : Plan and prepare for activities on demolition sites

  This unit of competency specifies the skills and knowledge required to assess the size and scope of large demolition projects, including structures or installations above 15 metres, on different types of sites and identify the resources required to complete the project on time and within budget. It includes communication of project requirements to team members in preparation for demolition work to commence.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCDE4002 : Plan demolition work to minimise risk to health, safety and environment

  This unit of competency specifies the skills and knowledge required to plan large demolition projects, including but not limited to structures or installations above 15 metres, to minimise environmental, public health and safety impact. It includes interpreting and meeting relevant compliance requirements and developing and implementing proactive measures to exceed them where possible.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCDE4003 : Supervise operational activities on demolition sites

  This unit of competency specifies the skills and knowledge required to monitor and direct demolition activities on large demolition projects, including structures or installations including but not limited to those above 15 metres on different types of sites to ensure that projects are completed within required timeframe and to specifications. It includes overseeing preparation for demolition work; reviewing safe work methods prior to task commencement; controlling, monitoring and directing team members throughout task completion; and overseeing site clean-up activities.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

• CPCCDE4004 : Finalise demolition activities and supervise property handover

  This unit of competency specifies the skills and knowledge required to ensure that large demolition projects, including but not limited to structures or installations above 15 metres in height and on different types of sites, are completed within the required timeframe and to specifications, with agreed alterations to specified work clearly recorded. It includes ensuring that the property is handed over to the owner or their nominated representative within projected timeframes and that relevant documentation is completed and processed.

  Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.

  Licensing, legislative, regulatory or certification requirements apply to demolition work in different states and territories. Candidates are advised to consult with the relevant regulatory authorities.

Course Details